Replacement Locks For Patio Doors at Lowe's
Replacing your patio door lock is an easy way to enhance the security of you home. However, it is essential to perform routine maintenance and install the lock correctly.
It is important to identify the type of patio door lock you are using to replace it successfully. upvc door locking mechanism replacement www.repairmywindowsanddoors.co.uk can determine the type by observing the size of the screw hole as well as the face plate on the end.
Identifying the lock you currently have
If you're considering buying new hardware for your lock, it's essential that you be aware of the differences between types of locks. This will allow you to find a replacement that is perfect for your home, and ensure its safety and security.
The most popular lock is one that is a cylinder lock. It's also known as pin-and-tumbler lock. This lock type makes use of the bottom pins, top pins and springs to keep the key hole and plug in place. Cylinder locks can be found in a variety sizes, and it is important to determine the exact length and diameter of your current cylinder before purchasing an alternative.
To determine the width take off the screws that hold the cylinder in position and slowly pull it out. Next, measure the distance between the outside edge of the cylinder and its inside edge and record the measurement in millimeters. Compare this number to the measurements of the lock you plan to purchase. This will help ensure that your new lock is the correct size and fits in the existing door lock hole.
Keys can also be used to check the size of an existing lock. If the key can slide into the cylinder with ease and easily, then it is the size of the rekeying kit that you need. If the key doesn't slide in, it's likely that your cylinder is using a different keyways and cannot be rekeyed to accept that key brand.
It is best to always follow the instructions supplied by the manufacturer that come with a rekeying kit. Every type of lock comes with specific installation requirements. It is recommended to to test the new lock after it has been installed to ensure it is working correctly and offers maximum security. You should also be aware of the additional features of your new lock, since they can affect its ease of use.
Take a measurement of the Width
A patio door lock that is not working correctly could lead to serious security problems. It's essential to regularly inspect your locks and replace them if necessary. This ensures that they're secure and operating well, and can aid in preventing issues like a loose latch or keyway. If your locks are worn out or damaged, you can find replacements at Lowe's which will offer the security you need for your home.
Before you buy a new patio door lock, it's essential to determine the dimensions of your current one. This will help you know what size lock to purchase and prevent the risk of buying the wrong lock. fit. You'll need two measurements to do this which are the backset and depth of the case. The first is the distance from the edge of the lock's face to the center of the round hole the spindle's handle enters and the other refers to the depth of the lock's body which can be seen from the outside of the door.
It's also important to consider the way you will use your doors when choosing the kind of lock you require. If your sliding doors open horizontally, you'll require a top-and-bottom tab style lock that engages with the strikeplate, preventing it from being lifted or opened. If your patio doors swing vertically, you'll need to choose mortise locks that have an attached hook latch which provides additional security.
When determining the dimensions of your current lock, it's essential to note the exact location of the screw holes. Some mortise lock screws are round while others are square. You'll be able to determine the location of the keyway. Some have a vertical keyway and others are tilted at 45 degrees. Take a picture of the lock with your digital camera to ensure you get the proper replacement.
After you've measured your home it's time to look for an updated patio door lock. On the internet, you'll discover a wide selection of high-quality locks. A lot of the top brands offer sophisticated security features that safeguard your home. Choosing the right lock is an investment in your home's safety and security, so it's essential to research and read reviews prior to buying. Be sure to keep your locks clean to prevent dirt and other debris from that could cause problems for your doors.
Be aware of the screw holes
Patio doors play an important part in protecting your home. They must be checked for signs of wear and tear to make sure they're operating correctly. Over time the spindle and locks that connect your interior and exterior handles could need to be replaced. A durable lock not only prevents unwanted entry but also helps improve the efficiency of your energy, safety and security.
There are many ways to narrow your search for a new lock, if you don't have the exact type. The first step is to identify the type of keyway it is using. Rectangular cutout mortise locks are commonly used on aluminum patio doors. E2126 and E2079 locks are set in a recess in the frame of wood or vinyl patio doors. If you have an electronic camera, uploading a photo of the lock may help in determining what type it is.
Another method of determining the type of lock you have is to examine the screw holes. Most sliding patio door locks have screw holes that are aligned with the latch keeper mounted on the side jamb. However, they are not always identical. For instance certain screws are longer than others, and may have an alternative threaded end. Some screws also have washers or a hex nut attached to them, which could affect the way they fit into the lock's hasp.
Once you have a clear idea what kind of lock you have, you can start preparing to install the new lock. First, you'll want to clean the lock with a soft cloth or brush to remove any debris or dirt that might be impeding its operation. Once the lock is clean, you can use a silicone-based grease to keep it smooth and quiet.
In the future, it's a good idea to replace the screws with more long ones. This will give you more grip and allow you to easily install the new lock. After you've done this it's good to test the handle to determine how the latch works with the lock.
If the hasp isn't engaging, you might need to add an hex-nut or washer behind it to make it catch more of the lip of the door. You can add a shim on the side of the lockkeeper on the jamb and see if it helps.
Check the Lock Snib
The snib acts as the mechanism that locks the door handle. The snib can be disengaged and engaged to open or close your patio doors and is the first thing to look at if your locks aren't functioning correctly. You can also inspect the keepers (located at the top and bottom of the door frame) to determine if they are loose or have a misalignment that could cause them to break. Verify that the snib has been seated correctly and that the lock hasn't become stuck or blocked in any other way.
The most commonly used patio door locks are mortise locks made of steel that lock sliding glass doors. They're installed in the door frame and come in various styles which makes them a great security measure. Some are designed to hold a key while others have an oval cutout that makes it easy to lock and unlock.
A thumb-screw style step-on lock is a different option. It will keep your sliding door in place without the need to turn the knob. These locks are often used on older patio doors, but could be a good choice to secure wood or vinyl-framed sliding doors too.
When you inspect your existing patio lock, note the type and size of screw holes used to attach the escutcheon and the lock body. This will help you select the replacement lock that has correct screw holes for the specific hardware for your patio door. It's also a good idea to inspect your strike plate and make sure it's securely secured.
If you have Jason Windows boltlock sliding doors between 2000 and 2009, be sure the screws that hold the door are secure and not loosened or missing. The screws keep the snib in a partially open "vent" mode, which allows airflow, but also promoting security. They are also crucial to stop your lock from being smashed. It is also a good idea that all locks be regularly inspected and cleaned frequently to prevent dirt, debris or corrosion from obstructing the operation the lock.
If your snib has broken, you may be able to replace the entire strikeplate and snib. However, if your snib's alignment is not aligned properly, you can fix it yourself by removing the strike plate with a putty knife, and then backing out the adjustment screw (located above and below the screw) to shift the strike plate up or down until its engagement tongue lines up with the Milgard logo on the snib.